Written Instructions – Viking Security Safe https://vikingsecuritysafe.com Keeping You Safe Sat, 02 Mar 2024 18:46:38 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.4 https://vikingsecuritysafe.com/wp-content/uploads/2022/03/cropped-favicon-4-1-32x32.png Written Instructions – Viking Security Safe https://vikingsecuritysafe.com 32 32 How to put batteries in the LED light for BL, SX and FL line of safes https://vikingsecuritysafe.com/how-to-put-batteries-in-the-led-light-for-bl-line-of-safes/ Thu, 19 Jul 2018 00:00:20 +0000 https://vikingsecuritysafe.com/?p=1273

1. Unscrew the little screw on the LED light. Pull down the Left (screw) side first and slide out.

2. Notice that one side has a plastic part sticking out. This part is holding the LED light in place when you put the light back in the 'nest'.

3. Install batteries inside the LED light and test by pressing the lever down. The light should turn on.

4. Put the LED light back in the 'nest' in the frame of the safe. Start with the lever side first. Slide it in on an angle.

5. Even up ap the LED light and screw back. You are done:-)!

]]> How to Mount a safe? https://vikingsecuritysafe.com/how-to-mount-a-safe/ Wed, 05 Jul 2017 12:33:46 +0000 https://vikingsecuritysafe.com/?p=828 This will be ONLY a suggestion – please consult professional for assessment of the location and material you want to mount the safe to.

We are working on this section now.

]]> How To Remove/Adjust shelve holders? https://vikingsecuritysafe.com/removeadjust-shelve-holders/ Wed, 05 Jul 2017 12:33:42 +0000 https://vikingsecuritysafe.com/?p=827 You push in the 2 “hands” towards the wall of the safe and the shelf holder will release the shelf at that end. After you release all 4 ends and the shelf is removed, you can press up the bottom of the shelf holder and you should be able to remove the shelf holder and move to a preferable level and adjust the shelf. To secure the shelf in place, simply align the shelf above the shelf holder and press down, so that the “hands” of the shelf holder will click in place.

 

]]> How To Change PIN Code on Viking BL-Line of safes? https://vikingsecuritysafe.com/change-pin-code/ Wed, 05 Jul 2017 00:00:46 +0000 https://vikingsecuritysafe.com/?p=824

Step 1:

Punch in the default PIN 1234 and HOLD the star (*) until the underscore ( _ ) shows up (1-2 seconds).


Step 2:

  • Punch in your Unique PIN Code and star (*).
  • DO NOT HOLD the star (*).


Step 3:

  • Punch in your Unique PIN Code and star (*) for the Second time.
  • DO NOT HOLD the star (*).

NOTE:

After you enter your Unique PIN Code and star (*) twice in a row the New PIN Code is confirmed by OK sign on the screen. Only your Chosen Registered PIN Code will be working.

Step 4: TEST

  • Punch in the old PIN Code 1234 and star (*) it should give you ERR – Error.
  • Punch in your Unique PIN Code and star (*). The safe should unlock.


NOTE:

  1. Should you need to change a Registered PIN Code to another PIN Code: follow the same steps using your Unique Registered PIN Code instead of the Default PIN Code.
  2. If you re-booted the safe by holding down the Red Button A for 10 seconds: your safe will go into Default Mode. All data, including the Registered PIN Code, will be deleted. The safe will open with the Default PIN Code 1234 and star (*). To change it to your Unique PIN Code again, follow the steps above.

]]>